Affinity Groups - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management
3.5.3

Affinity Groups

This section explains the commands related to affinity groups. An affinity group is used to associate volumes
with LUNs (as seen from the host). It is only valid when Host Affinity Mode is enabled.
In GUI, "LUN group number" and "LUN group name" is respectively displayed instead of "affinity group
number" and "affinity group name".
251
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0