Show Host-Affinity - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-affinity

show host-affinity

This command displays a list of affinity groups associated with host identifiers. Individual affinity groups, port
groups, host groups, host identifiers or host interface ports can be specified. However, if the ports with Host
Affinity Mode "disabled" belong to a port group for which LUN mapping is set, the ports are displayed.
Multi-group volume information, which indicates whether or not the same volume is defined for multiple
affinity groups, is a status flag.
■ Syntax
show host-affinity [-port {
[-ag-number
[-host-number
[-port-group-number
[-host-group-number
■ Parameter
-port
-ag-number
or
-ag-name
-lg-number
or
-lg-name
-host-number
or
-host-name
xyz
|all}]
ag_numbers ag_names
| -ag-name
host_numbers
| -host-name
port_group_number
host_group_number
Optional. This parameter specifies the host interface ports to be narrowed down. Two or more
parameters can be specified by separating them with a comma. If omitted, all the host
interface ports are selected.
Example: -port 000,100
For details, refer to "1.2.14 Host Interface Port Syntax" (page
xyz "x" is the controller module (CM) number, "y" is the CA number, and "z" is the host port
number.
Example: "123" indicates CM#1-CA#2-Host port#3
all All the host interface ports (default)
Optional. This parameter specifies the affinity group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
Syntax" (page 24). If omitted, this parameter is ignored.
Optional. This parameter specifies the LUN group identifiers to be narrowed down. One or
more parameters can be specified at the same time. For details, refer to
Syntax" (page 24). If omitted, this parameter is ignored.
Optional. This parameter specifies the host identifiers to be narrowed down. One or more
parameters can be specified at the same time. For details, refer to
23). If omitted, this parameter is ignored.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
lg_numbers
| -lg-number
host_names
]
port_group_name
| -port-group-name
host_group_name
| -host-group-name
279
lg_names
| -lg-name ]
]
]
25).
"1.2.11 Affinity Group
"1.2.11 Affinity Group
"1.2.10 Host Syntax" (page
P2X0-1030-09ENZ0