Fujitsu ETERNUS DX80 S2 Cli User's Manual page 543

Chapter 4 Function/System Settings and Display
4.3 Network Management > set ais-connect
-server-certification
-proxy-server
-proxy-port-number
-proxy-type Optional. This parameter specifies the type of communication with the proxy server. This
-user-name Optional. This parameter specifies the user name for proxy server authentication. Up to 32
■ Example(s)
The following example sets up an AIS Connect operation environment:
CLI> set ais-connect -function enable -port maintenance -send-log enable -country-code 392 -server-certifi-
cation enable -proxy-server foo.bar -proxy-port-number 123 -proxy-type http -proxy-user-name User1
Password :
Confirm Password :
Optional. This parameter specifies whether to enable server certification for SSL/TLS communi-
cation between the ETERNUS DX Disk storage system and the AIS Connect server. This parame-
ter cannot be specified when the AIS Connect function is disabled. If omitted, the existing
setting is not changed.
enabled Server certification is enabled (default).
disable Server certification is disabled.
Optional. This parameter specifies the proxy server. Only one proxy server can be specified at
the same time. The server name format should be either IPv4 standard notation (a base 256
"d.d.d.d" string) or a fully qualified domain name (FQDN). Up to 63 alphanumeric characters
can be specified. When a proxy server is not used, specify consecutive double quotations (""). If
consecutive double quotations ("") are specified, the proxy port number, the proxy type, and
the user name are initialized. When the AIS Connect function is disabled, only consecutive dou-
ble quotations ("") can be specified. If omitted, the existing setting is not changed.
Example: -proxy-server 192.168.1.20
Example: -proxy-server foo.bar
Optional. This parameter specifies the proxy server port number. Specify the port number
within 1 to 5 digits. The port number cannot be set above 65535. This parameter cannot be
specified when the AIS Connect function is disabled or the proxy server is not set. If omitted,
the existing setting is not changed.
parameter cannot be specified when the AIS Connect function is disabled or the proxy server is
not set. If omitted, the existing setting is not changed.
http Basic/NTLM HTTP authentication
socks SOCKSv5 authentication
characters can be specified. This parameter cannot be specified when the AIS Connect function
is disabled or the proxy server is not set. If omitted, the existing setting is not changed.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
543
P2X0-1030-09ENZ0