Delete Rec-Buffer - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > delete rec-buffer

delete rec-buffer

This command is used to delete an existing REC buffer definition.
■
Syntax
delete rec-buffer -partition {0|1|2|3|4|5|6|7}
■ Parameter
-partition
■ Example(s)
The following example deletes partition #1:
CLI> delete rec-buffer -partition 1
This parameter specifies the REC buffer group number that is to be deleted. This number starts
from 0. Two or more numbers cannot be specified at the same time. The selectable range is as
follows:
ETERNUS DX90 S2: 0 to 3
ETERNUS DX400 S2 Series: 0 to 7
ETERNUS DX8000 S2 Series: 0 to 7
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
441
P2X0-1030-09ENZ0