Delete Snmp-Trap - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > delete snmp-trap

delete snmp-trap

This command deletes the SNMP trap that corresponds to an SNMP community. This command deletes the
trap, but does not delete the specified SNMP community.
■ Syntax
delete snmp-trap -trap-number
■ Parameter
-trap-number
■ Example(s)
The following example deletes SNMP trap numbers 2-4:
CLI> show snmp-trap
Trap SNMP
No. Version
1 v1
2 v2c
3 v3
4 v3
5 v3
CLI> delete snmp-trap -trap-number 2-4
CLI> show snmp-trap
Trap SNMP
No. Version
1 v1
5 v3
trap_numbers
This parameter specifies the setting trap number. The trap number can be confirmed using the
"show snmp-trap" command.
Manager IP Community
Number Address Name
1 192.168.100.250 "community1"
2 192.168.2.1 "community2"
3 10.0.0.1
4 192.168.100.101
1 192.168.100.250
Manager IP Community
Number Address Name
1 192.168.100.250 "community1"
1 192.168.100.250
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
User
Name
"User1"
"user_four"
"trap_user2"
User
Name
"trap_user2"
500
Port
Number
162
162
162
8162
162
Port
Number
162
162
P2X0-1030-09ENZ0