Show Encryption - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show encryption

show encryption

This command displays the status of the encryption mode.
Encryption-related functions may not be available for some user environments.
■
Syntax
show encryption
■ Parameter
No parameters.
■ Output
# Encryption Mode [Fujitsu]
A
A: Encryption mode
■ Example(s)
The following example displays whether the encryption mode is enabled or disabled:
CLI> show encryption
Encryption Mode [Fujitsu]
CLI> show encryption
Encryption Mode [AES]
CLI> show encryption
Encryption Mode [Disable]
566
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0