Chapter 5 Information Settings and Display
5.3 Maintenance > export panic-dump
export panic-dump
This command exports a panic dump file stored in the system to the specified FTP server. The panic dump
information, including the panic dump number, can be displayed by using the "show panic-dump" command.
■
Syntax
export panic-dump -port {maintenance | remote | fst} -server
-user
login_user_account
[-divide {no|4mb|1mb|640kb}] [-indicator {enable | disable}]
■
Parameter
-port
-server
-user
-filename
filename
This parameter specifies which Ethernet port is used to connect to the FTP server. For details,
refer to
"1.11 Note for Specifying FTP Server" (page 31)
maintenance
MNT port
remote
RMT port
fst
FST port (not supported by the ETERNUS DX80 S2/DX90 S2)
This parameter specifies the FTP server name which will store the panic dump. The server
name format is IPv4 standard notation (a base 256 "d.d.d.d" string) or a fully qualified domain
name (FQDN).
Example: -server 192.168.1.20
Example: -server foo.bar
This parameter specifies the user name that can access the FTP server. This command displays
a password prompt.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
server_name
-dump-number
dump_number
641
P2X0-1030-09ENZ0