Show Balancing-Thin-Pro-Volumes - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > show balancing-thin-pro-volumes

show balancing-thin-pro-volumes

This command displays information such as the status and progress of TPV balancing. The information of only
TPVs that are being balanced is displayed.
■ Syntax
show balancing-thin-pro-volumes [-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
# Volume
# No. Name
# 0 TPV00
# 1 TPV01
# 2 TPV02
A B
# <RAID Group List>
# RAID Group
# No. Name
I J
A: Volume number
B: Volume name
C: Balancing level
D: Balancing process status
E: Balancing process progress
F: Working volume number
G: Error code
H: Elapsed time
I: RAID Group Number (Only when specifying Volume)
J: RAID Group Name (Only when specifying Volume)
K: Used Capacity(Unit : MB) (Only when specifying Volume)
Optional. This parameter specifies the number of volumes that is to be displayed (filtering).
Only one number can be specified. For details, refer to
Example: -volume-number 1
An error occurs when a volume other than a TPV is specified.
Balancing Balancing Process
Level Status Progress(%) No.
High Active 99
Medium Active 50
Low Error
C D
Used
Capacity(MB)
K
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_number
| -volume-name
"1.2.9 Volume Syntax" (page
Work Volume Error Elapsed
1023
2047
30 4095
E F
171
volume_name
22).
code Time
0x00 02h34min50sec
0x00 01h23min45sec
0x73 00h30min30sec
G H
P2X0-1030-09ENZ0
]