Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > set eco-thin-pro-pool
set eco-thin-pro-pool
This command is used to associate an ECO schedule with a specified Thin provisioning pool(s). When
registering a ECO schedule, refer to the "create eco-schedule" command. ECO mode may not be used for Thin
provisioning pool(s) that contain SSD drives.
■
Syntax
set eco- thin-pro-pool {-pool-number
[-schedule-number
■
Parameter
-pool-number
or
-pool-name
-schedule-number
or
-schedule-name
-action
■
Example(s)
The following example associates the ECO schedule named "SC001" with Thin provisioning pool#01:
CLI> set eco-thin-pro-pool -pool-number 01 -schedule-name SC001 -action enable
The following example associates the ECO schedule named "SC001" with thin provisioning pool #01 - #05 at
the same time:
CLI> set eco-thin-pro-pool -pool-number 01-05 -schedule-name SC001 -action enable
The following example disables the ECO function of the Thin provisioning pool named "TPP01":
CLI> set eco-thin-pro-pool -pool-name TPP01 -action disable
pool_numbers
schedule_number
| -schedule-name
This parameter specifies the Thin provisioning pool identifiers. One or more Thin provisioning
pool identifiers can be specified. For details, refer to
(page
20).
Optional. This parameter specifies an ECO schedule identifier. Only one ECO schedule number
can be specified.
If omitted, the existing setting is not changed. For details, refer to
Syntax" (page
25).
This parameter specifies whether the associated definition is enabled.
enable
The associated definition is enabled.
disable
The associated definition is disabled.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
| -pool-name
pool_names
schedule_name
"1.2.5 Thin Provisioning Pool Syntax"
87
}
] -action {enable|disable}
"1.2.13 ECO Schedule
P2X0-1030-09ENZ0