Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > show syslog-notification
show syslog-notification
This command displays settings of the syslog server association.
■
Syntax
show syslog-notification
■
Parameter
No parameters.
■
Output
# Server1 function
# Server1
# Server1 Port Number
# Server1 Port
# Server2 function
# Server2
# Server2 Port Number
# Server2 Port
A:
It shows whether syslog server 1 is enabled.
B:
FQDN or IP address (IPv4 or IPv6) of the syslog server 1
C:
UDP port number of the syslog server 1 for the syslog protocol
D:
It shows which port is used.
E:
It shows whether syslog server 2 is enabled.
F:
FQDN or IP address (IPv4 or IPv6) of the syslog server 2
G:
UDP port number of the syslog server 2 for the syslog protocol.
H:
It shows which port is used.
■
Example(s)
The following example displays the settings of the syslog servers:
CLI> show syslog-notification
Server1 Function
Server1
Server1 Port Number [514]
Server1 Port
Server2 Function
Server2
Server2 Port Number [517]
Server2 Port
Enable (RFC3164)
A
10.21.134.198
B
514
C
MNT
D
Enable (RFC5424)
E
10.17.80.6
F
517
G
RMT
H
[Enable (RFC3164)]
[10.21.134.198]
[MNT]
[Enable (RFC5424)]
[10.17.80.6]
[RMT]
582
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0