Chapter 2 Status Display
2.1 Storage System Status > show fru-ce
For SAS, iSCSI, and FCoE, outputs differ from an FC host interface output at the "CM#x CA#x Port#x
Information" level.
For SAS information, the following information is displayed:
CM#0 CA#0 Port#0 Information
Port Type
Port Mode
Status/Status Code
CA Active EC
CA Next EC
Transfer Rate
Link Status
Port WWN
Node WWN
Host Affinity
Host Response
CM#0 CA#0 Port#1 Information
Port Type
Port Mode
Status/Status Code
CA Active EC
CA Next EC
Transfer Rate
Link Status
Port WWN
Node WWN
Host Affinity
Host Response
For iSCSI information, the following information is displayed:
CM#0 CA#0 Port#0 Information
Port Type
Port Mode
Status/Status Code
CA Active EC
CA Next EC
Transfer Rate
Link Status
iSCSI Name
iSCSI Alias Name
Host Affinity
Host Response
iSNS Server Port No [0x0000]
TCP Port No
TCP Window Size
VLAN ID
Header Digest
Data Digest
Bandwidth Limit
Target Portal Group No
CmdSN Count
Err Recovery Lvl
Task Retain Time
Reconnection Wait Time
SFP Type
SFP Information
Temperature
Voltage
Current
TX Power
RX Power
[SAS]
[CA]
[Normal
/ 0xE001]
[EC#0]
[EC#0]
[Auto Negotiation]
PHY#0[Link Down
]
PHY#2[Link Down
]
[500000E0D1000011]
[500000E0D1000000]
[Disable]
[3]
[SAS]
[CA]
[Normal
/ 0xE001]
[EC#0]
[EC#0]
[Auto Negotiation]
PHY#0[Link Down
]
PHY#2[Link Down
]
[500000E0D1000011]
[500000E0D1000000]
[Disable]
[3]
[iSCSI]
[CA]
[Normal
/ 0xE001]
[EC#0]
[EC#0]
[1Gbps/Auto]
[Link Down]
[iqn.2000-09.com.fujitsu:storage-system.eternus-dxl:00000000]
[]
[Disable]
[0]
[0x0000]
[0x00]
[-]
[OFF]
[OFF]
[-]
[0x0000]
[Unlimited]
[0x00]
[-]
[-]
[SFP+]
Present
Warning(Low/High)
[40.11C]
[-15.00C/100.00C]
[4.24V]
[10.25mA]
[5.00mA/12.00mA]
[1.35mW]
[0.50mW/1.50mW]
[1.35mW]
[0.50mW/1.50mW]
59
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
PHY#1[Link Down
]
PHY#3[Link Down
]
PHY#1[Link Down
]
PHY#3[Link Down
]
Alarm(Low/High)
[-30.00C/128.00C]
[3.00V/5.00V]
[2.00V/7.00V]
[2.00mA/15.00mA]
[0.00mW/1.80mW]
[0.00mW/1.80mW]
P2X0-1030-09ENZ0