Delete Port-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > delete port-group

delete port-group

This command deletes the specified port group(s).
Port groups for which mapping is set cannot be deleted.
■
Syntax
delete port-group {-port-group-number
■ Parameter
-port-group-number
or
-port-group-name
■ Example(s)
The following example only deletes port group #1:
CLI> delete port-group
The following example deletes port group # 1 and port groups #3 to #5:
CLI> delete port-group
This parameter specifies the port group identifiers to be deleted. One or more parameters can
be specified at the same time. For details, refer to
-port-group-number 1
-port-group-number 1,3-5
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
port_group_numbers
| -port-group-name
"1.2.15 Port Group Syntax" (page
314
port_group_names
}
26).
P2X0-1030-09ENZ0