Fujitsu ETERNUS DX80 S2 Cli User's Manual page 548

Chapter 4 Function/System Settings and Display
4.3 Network Management > show ais-connect
A: It indicates whether the AIS Connect function is enabled.
B: It indicates the LAN port on the ETERNUS DX Disk storage system that communicates with the AIS Connect
server.
C: It indicates whether logs are automatically sent.
D: It indicates the code and name of the country where the ETERNUS DX Disk storage system is shipped. If it is not
set, a hyphen (-) is displayed.
E: It indicates the code and name of the country in which the support office for the ETERNUS DX Disk storage
system is located. If it is not set, "Undefined" is displayed.
F: It indicates whether server certification is disabled.
G: It indicates the FQDN or IP address (IPv4) of the proxy server. If it is not set, a hyphen (-) is displayed.
H: It indicates the proxy server port number. If it is not set, a hyphen (-) is displayed.
I: It indicates the type of communication with the proxy server (HTTP / SOCKS). If it is not set, a hyphen (-) is dis-
played.
J: It indicates the user name for proxy authentication.
K: It indicates whether a remote session from the AIS Connect server to the ETERNUS DX Disk storage system is
allowed.
L: It indicates the timeout interval for remote sessions. A number between 1 to 24 or "Unlimited" is displayed.
M: Root certification issuer
N: Starting date of the validity period for the root certification
O: Ending date of the validity period for the root certification
■ Example(s)
The following example displays the operation environment of AIS Connect:
CLI> show ais-connect
AIS Connect Function
Port
Send Log(Auto)
Country Of Installation
Service Contract Responsibility [392 (JAPAN)]
SSL Server Certification
Proxy Server
Proxy Port Number
Proxy Type
Proxy User Name
Remote Session
Remote Session Timeout(hour)
<Trusted Root Certification Authorities>
Issuer Name
Valid From
Valid To
Issuer Name
Valid From
Valid To
[Enable]
[MNT]
[Enable]
[392 (JAPAN)]
[Enable]
[foo.bar]
[123]
[HTTP]
[User1]
[Permit]
[3]
[Fujitsu Certification Authority]
[2012-08-17 13:04:47]
[2015-08-17 13:04:47]
[Fujitsu Certification Authority2]
[2012-08-17 13:04:47]
[2015-08-17 13:04:47]
548
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0