Delete Volume - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > delete volume

delete volume

This command deletes existing volume(s). Snap Data Pool Volume (SDPV) cannot be deleted using this
command. SDPVs must be deleted using the "delete snap-data-pool-volume" command.
• All mappings associated with the host must be released before a specified volume is deleted.
• All migrating volumes (RAID migration) must be stopped before a specified volume is deleted.
• Advanced Copy sessions to be deleted must be stopped before specified volume is deleted.
The "delete flexible-tier-volume" command is used to delete Flexible Tier Volumes (FTVs).
■
Syntax
delete volume {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example deletes both the volume named "VOL001" and "VOL002" at the same time:
CLI> delete volume -volume-name VOL001,VOL002
volume_numbers
This parameter specifies the volume identifiers to be deleted. One or more RAID groups can be
specified at the same time. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_names
| -volume-name
"1.2.9 Volume Syntax" (page
151
}
22).
P2X0-1030-09ENZ0