Fujitsu ETERNUS DX80 S2 Cli User's Manual page 410

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management
• TEXT type
Path information is directly described using a text editor or similar tool (details follow). This is the
recommended approach for CLI-use.
• BINARY type
Path information is created and revised using the GUI edit function. This is the recommended approach for
GUI-use.
The contents of a typical REC path information file are as follows:
ETERNUS DX90 S2#1
ETERNUS DX90 S2#2
convert rec-path
Path information can be
converted to the other type
with a CLI command.
4.2.5.2 Path Information File Syntax (TEXT type)
For CLI-use, a path information file should be created using text editor, or something similar. The TEXT type
path information file description rules are as follows:
■ Basic rules
• Only ASCII characters may be used.
• All label names must be in lowercase. The following is a correct example.
storage 10
The following example has an uppercase label (a syntax error):
STORAGE 10
• Lines 'starting' (first non-space character) with a hash mark (#) are handled as comment lines. The
following example shows a correct comment line:
# definition of storage system
Configuration Information in the ETERNUS DX Disk storage system
CLI
Back-up REC Path Information
Path information file
(BINARY type)
CLI
show backup-rec-path-information
import rec -path Either type is fine.
FTP server
Path information file
(TEXT type)
Path information file
(BINARY type)
ETERNUS DX90 S2#3
GUI
410
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
REC Path Information
show rec-path
show backup-rec-path
Path information can be directly
described with a text editor.
Path information can be created
and revised with a GUI tool.
Storage system
information file
P2X0-1030-09ENZ0