Fujitsu ETERNUS DX80 S2 Cli User's Manual page 330

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set lu-qos-group
■
Example(s)
The following example sets the LU QoS Group:
CLI> set lu-qos-group -lu-qos-group 1 -lun 2 -bandwidth-limit 15
CLI> set lu-qos-group -lu-qos-group 1 -lun 1,2 -bandwidth-limit 1
CLI> set lu-qos-group -lu-qos-group 1 -lun 1,2 -bandwidth-limit 1,2
0 Unlimited
1 15,000 IOPS (800MB/s)
2 12,600 IOPS (700MB/s)
3 10,020 IOPS (600MB/s)
4 7,500 IOPS (500MB/s)
5 5,040 IOPS (400MB/s)
6 3,000 IOPS (300MB/s)
7 1,020 IOPS (200MB/s)
8 780 IOPS (100MB/s)
9 600 IOPS (70MB/s)
10 420 IOPS (40MB/s)
11 300 IOPS (25MB/s)
12 240 IOPS (20MB/s)
13 180 IOPS (15MB/s)
14 120 IOPS(10MB/s)
15 60 IOPS (5MB/s)
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
330
P2X0-1030-09ENZ0