Show Lcd-Suppress - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > show lcd-suppress

show lcd-suppress

This command displays the information on LCD suppression. This command can only be used for the ETERNUS
DX8700 S2.
■ Syntax
show lcd-suppress
■ Parameter
No parameters.
■
Output
CLI> show lcd-suppress
Parts Error
Parts Warning
Disk Error
Disk Warning
A: It shows whether error display for the components (other than drives) is displayed on the LCD.
Display: Displayed
Suppress: Not displayed
B: It shows whether warning display for the components (other than drives) is displayed on the LCD.
Display: Displayed
Suppress: Not displayed
C: It shows whether error display for the drives is displayed on the LCD.
Display: Displayed
Suppress: Not displayed regardless of the number of hot spares left
Display (HS<0): Not displayed when hot spares are left
D: It shows whether warning display or the drives is displayed on the LCD.
Display: Displayed
Suppress: Not displayed regardless of the number of hot spares left
Display (HS<0): Not displayed when hot spares are left
■ Example(s)
The following example displays the information on LCD suppression:
CLI> show lcd-suppress
Parts Error
Parts Warning
Disk Error
Disk Warning
[Display]
A
[Suppress]
B
[Display (HS<0)]
C
[Display]
D
[Display]
[Suppress]
[Display (HS<0)]
[Display]
526
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0