Set Email-Notification - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > set email-notification

set email-notification

This command sets up parameters relating to E-mail notification functions.
■
Syntax
set email-notification [-send {enable|disable}] [-port {maintenance|remote|fst}]
[-port-number
[-user user_name
address
[-to5
strings
[-text5
[-retry-count
[-partial-size
[-customer-info {enable|disable}]
■ Parameter
-send
-port
-port-number
-server
port_number smtp_server
] [-server
][-from mail_address ] [-to1
count
] [-text-count ] [-text1
strings strings
] [-text6 ] [-text7
count interval
] [-retry-interval
size
] [-send-log {enable|disable}] [-iom-log {enable|disable}]
Optional. This parameter specifies the E-mail notification mode. It specifies whether the E-
mail notification function is enabled or not. If this parameter is omitted, the status is not
changed. The initial value is disabled. All necessary parameters to send E-mail must be
specified when enabling this parameter.
enable E-mail notification is enabled.
disable E-mail notification is disabled (default).
Optional. This parameter specifies the Ethernet port to connect to an SMTP Server. If omitted,
the existing setting is not changed. For details, refer to
(page 31).
maintenance
MNT port
remote RMT port
fst FST port (ETERNUS DX410 S2/DX440 S2 only)
Optional. This parameter specifies the port number to connect to an SMTP server. If omitted,
the existing setting is not changed. The initial value is 25.
Optional. This parameter specifies the SMTP server address. Up to 64 letters can be specified.
The server name format is IPv4 standard notation (a base 256 "d.d.d.d" string), IPv6 address
format, or a fully qualified domain name. The types of IPv6 addresses that can be specified are
global addresses (including 6to4 addresses), link local addresses, and unique local addresses.
If omitted, the existing setting is not changed.
Example: -server 192.168.1.20
Example: -server fd80::abd0:223:ad
Example: -server foo.bar
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
] [-authentication {none|auto|cram-md5|plain|login}]
address ] [-to2 address ] [-to3
strings strings
] [-text2 ] [-text3
strings
] [-text8 ] [-text9
seconds
] [-timeout ] [-partial-mode {enable|disable}]
506
address ] [-to4 address
strings strings
] [-text4 ]
strings strings
] [-text10 ]
"1.11 Note for Specifying FTP Server"
P2X0-1030-09ENZ0
]