Fujitsu F2MC-8FX Hardware Manual page 443

• Activation using the input clock
A startup trigger is generated at the rise of the input clock signal.
To select the input clock, use the external start signal select bit (ADC2.ADCK).
To select the ADTG input pin
To select the 8/16-bit composite timer (TDO0)
Selecting the A/D conversion precision
To select the precision of conversion results, use the precision select bit (ADC2.AD8).
Operating mode
To select 10-bit precision
To select 8-bit precision
Using analog input pins
To select an analog input pin, use the analog input channel select bits (ADC1.ANS[3:0]).
Operation
To use the AN0 pin
To use the AN1 pin
To use the AN2 pin
To use the AN3 pin
To use the AN4 pin
To use the AN5 pin
To use the AN6 pin
To use the AN7 pin
Input clock
Analog input channel select bits (ANS[3:0])
CHAPTER 23 10-BIT A/D CONVERTER
External start signal select bit
(ADC2.ADCK)
Set the bit to "0".
Set the bit to "1".
Precision select bit (AD8)
Set the bit to "0".
Set the bit to "1".
Set the pins to "0000".
Set the pins to "0001".
Set the pins to "0010".
Set the pins to "0011".
Set the pins to "0100".
Set the pins to "0101".
Set the pins to "0110".
Set the pins to "01111".
429