Caller Id Indication (Analog Trunks - NEC Electra Elite 48/192 Features And Specifications Manual

Caller ID Indication
(Analog Trunks)
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Analog Caller ID can display the calling party telephone number or name on
the LCD of the Multiline Terminal for incoming calls. Up to 16 Multiline Display
Terminals can display the Number or Name for the incoming analog trunk.
After the CO call is answered, the Caller ID information follows the transferred
call.
System Software S4000 or higher is required to display the number and
name at the same time for Analog Trunks.
Terminal Type:
All Multiline Terminals with an LCD
Required Components:
COID(4)-U10 ETU
COID(8)-U10 ETU
COIB(4)-U10 ETU
MIFM-U10 ETU with KMM(1.0)U installed when Caller ID Scrolling or Call
Return is desired.
To display a stored Caller ID using the Scroll Key:
Press the Scroll key to display the last incoming Caller ID. Repeatedly
press the Scroll key to display additional Caller ID names/numbers. (A
maximum of 10 Caller ID names/numbers can be displayed.)
Note: The Scroll key is programmed using Memory Block 4-12 (Line Key Selection for
the Telephone Mode). Refer to the Electra Elite 48/192 Programming Manual
for instructions.
C-5
C - 17