NEC Electra Elite 48/192 Features And Specifications Manual page 165

Issue 6
SERVICE
CONDITIONS
C - 46
3. Dial CAR key extension.
4. Go on-hook or press
Data Assignment:
Use Memory Block 1-08-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 2 LK2 to Allow (default: LED On) or Deny (LED
Off) Call Forward set/cancel from the destination station.
Use Memory Block 1-08-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 2 LK3 to Allow (LED ON) or Deny (default: LED
Off) Call Forward system-wide reset.
Use Memory Block 1-08-08 [Class of Service (Station) Feature
¥
Selection 2] Page 5 LK4 to Allow (LED ON) or Deny (default: LED
Off) Call Forward – Off-Premise.
Restrictions:
A maximum of 24 digits, including pauses can be stored as the
¥
destination outside number. (The Trunk Access Code is not counted
as part of the 24-digit number.)
When Call Forward - All Call is set and an outgoing outside line is not
¥
available, the Automated Attendant call is not forwarded and a busy
tone is sent to the calling party or the Automated Attendant switches
to normal Day or Night ringing.
When Call Forward - Busy/No Answer is set, the caller hears
¥
ringback tone until a trunk is available. When an outside line is
unavailable, DIT/ANA calls are not forwarded, these calls remain at
the station setting the Call Forward – Off-Premise until a line is
available.
Even when Call Forward – Off-Premise is set, Recall, Trunk Queuing,
¥
and Automatic Callback calls directed to the extension line are not
forwarded.
The Call Forward destination number cannot be routed by Least Cost
¥
Routing.
When a Multiline Terminal in Call Forward - All Call (internal) is
¥
unplugged, it follows the all call forwarding.
When a Multiline Terminal in Call Forward – Off-Premise is
¥
unplugged, the call is not forwarded off premise.
Setting, canceling, or Call Forwarding is allowed only when logged
¥
out of ACD.
P
.
Call Forward – Off-Premise
Electra Elite