NEC Electra Elite 48/192 Features And Specifications Manual page 415

Issue 6
SERVICE
CONDITIONS
L - 4
Data Assignment:
Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
¥
Assignment] to change Last Number Redial Access Code (default:
) .
,
Restrictions:
Internal calls do not apply to this feature.
¥
General:
Last Number Redial memory is protected by battery backup.
¥
Last Number Redial stores up to 24 digits (plus the Trunk Access
¥
Code).
The Access Code
¥
Redial key.
This feature can be assigned to a Feature Access or One-Touch key.
¥
To store the last Dial Access number dialed in a Station Speed Dial
¥
buffer, press the Feature key and Redial key, dial the Speed Dial
buffer number, and press Redial key, then the Feature key.
To display the Last Number Redial memory buffer, press the Conf
¥
key, Redial key, and then
A Private Line must be accessed by Direct CO access for Redial to
¥
operate.
Manually dialed numbers, Speed Dial numbers, Save/Store and
¥
Repeat numbers, One-Touch dial numbers, or combinations can be
redialed using the Last Number Redial feature when the last number
dialed is less than 24 digits.
A Trunk Access Code is automatically inserted when the last call was
¥
made by manually selecting an outside line.
is fixed in system software for use with the
,
.
,
Electra Elite
Last Number Redial