NEC Electra Elite 48/192 Features And Specifications Manual page 269

Issue 6
D - 60
4. Press memory, and enter the storage location (0~9).
Note:When you store a number in an occupied memory location the new
number replaces the one previously stored.
5. Listen for long beep, and wait for talk/battery low LED to go off
to ensure that the number is stored.
6. Log the stored number.
To dial a stored memory number:
1. Press talk.
2. Press memory .
3. Press memory location (0~9).
4. The telephone dials the stored number.
To chain dial a special access code:
1. Store the access code in a memory location.
2. Dial the main number.
3. Press memory and memory location (0~9) to enter access code
as applicable.
To erase a stored number
1. Lift the handset.
2. Press memory twice.
3. Press memory location to erase.
4. A long beep confirms that the number is erased.
Mute operation:
1. During a call, press mute to turn off the microphone.
2. To cancel mute, press mute or talk.
Electra Elite
term
D ® Analog Cordless Terminal