Unsupervised Conference - NEC Electra Elite 48/192 Features And Specifications Manual

Unsupervised Conference

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Unsupervised Conference allows a Multiline Terminal user to exit an
established conference call and leave the remaining parties to continue
talking. This same user can then reenter the conference anytime.
Terminal Type:
All Multiline Terminals
Required Components:
None
To exit a conference:
1. Establish a conference call from a Multiline Terminal.
R
2. Press (conferenced CO line keys turn red).
3. Multiline Terminal user now hears dial tone.
To enter a conference again:
1. Lift the handset or press
R
2. Press .
Data Assignment:
Use Memory Block 1-8-08 [Class of Service (Station) Feature Selection
¥
2] Page 4 LK8 to Allow (LED On) or Deny (default: LED Off) the
Unsupervised Conference for each Class of Service.
Use Memory Block 4-94 (3-Minute Alarm Selection) to specify whether
¥
(YS) or not (default: NO) a warning signal sounds every three minutes
for the duration of the call. A telephone in the DND Mode can still hear
the warning sounds.
P
.
U-5
U - 19