NEC Electra Elite 48/192 Features And Specifications Manual page 437

Issue 6
M - 14
Default Trunk Access Codes include the following:
¥
• Dial 9 Trunk Group 1
• Dial 8 Trunk Group 2
• Dial 70 Trunk Group 3
• Dial 71 Trunk Group 4
• Dial 72 Trunk Group 5
• Dial 73 Trunk Group 6
• Dial 74 Trunk Group 7
• Dial 75 Trunk Group 8
Use Memory Block 3-03 (Trunk-to-Trunk Group Assignment) to
¥
assign a Trunk Group number (01~32) to each CO/PBX line.
Restrictions:
A trunk can be assigned to only one Trunk group.
¥
General:
Dial Access is provided only on Multifunction registered systems.
¥
At default, CO/PBX lines 01~ 08 are assigned in Trunk Group 1, all
¥
Tie lines are assigned in Trunk group 2, and no additional CO/PBX
lines or DID lines are assigned to a Trunk group.
The system provides for 32 Trunk groups.
¥
Trunks can be assigned to any or all Tenant groups.
¥
Various features such as Code Restriction (outgoing), LCR, and
¥
Route Advance Block are based on Trunk groups.
Trunk groups can be assigned to a Flexible Line key as a Pooled Line
¥
(outgoing).
Electra Elite
Multiple Trunk Groups