NEC Electra Elite 48/192 Features And Specifications Manual page 49

Issue 6
RELATED FEATURES
LIST
A - 28
Restrictions:
When a CO/PBX line is assigned for ANA, the Night Mode CO/PBX
¥
ring assignment is disabled.
General:
ANA incoming ringing is assigned for Distinctive Ring or
¥
Synchronous Ring system-wide.
When a busy station, programmed for ANA, receives an incoming
¥
ANA call, the system provides Camp-On tone for the busy station.
The calling party receives ringback tone until the call is answered.
A Call Pickup for the same tenant, Access Code 68 (default), can be
¥
used to answer ANA calls.
ANA calls do not activate External Tone Ringer or Night Chime.
¥
ANA calls can be assigned to ring on voice mail ports. A hunt group
¥
can be assigned by using the internal master hunt number
assignments.
When a station, programmed for ANA, receives an incoming ANA
¥
call, internal ring tone is heard at all stations where a secondary
incoming extension appears and is assigned to ring.
Incoming ANA calls cannot be answered directly at the CO line key
¥
appearance. The CO line key indicates Other Use (red LED).
While an incoming ANA call is being received, an internal call cannot
¥
be made.
When Memory Block 3-61 (DIT/ANA Delay Answer Time Selection)
¥
is set to 0 (default), ANA is performed immediately after call
termination. System Software S4000 or higher is required.
Use Memory Block 3-63 (DIT Weekend Mode Selection) to allow or
¥
deny the ANA delay to follow the weekend setting when a tenant is
placed in weekend mode. System Software S4000 or higher is
required.
Use Memory Block 3-64 (DIT Night Mode Delay Answer Selection) to
¥
allow or deny the ANA delay to follow the night mode setting system-
wide or when a tenant is placed in night mode. System Software
S4000 or higher is required.
Feature
Number
D-11
Feature Name
Direct Inward Terminatio n(DIT)
Assigned Night Answer (ANA)
Electra Elite