NEC Electra Elite 48/192 Features And Specifications Manual page 163

Issue 6
C - 44
To set Call Forward – All Call at a Single Line Telephone or a
Multiline Terminal:
1. Lift the handset or press
2. Dial Access Code
3. Dial the Trunk Access Code and telephone number where
incoming calls are to be forwarded.
4. Restore the handset or press
To verify Call Forward – All Call (Multiline Terminals only):
T
A winking LED indicates the station is in Forward – All Call mode.
The Feature Access or One-Touch key LED (when equipped) remains
on while this setting is assigned on the key.
To cancel Call Forward – All Call (Multiline Terminal only):
Press Call Forward – All Call ON/OFF key or
To cancel Call Forward – All Call at a Single Line Telephone or a
Multiline Terminal:
1. Lift the handset or press
2. Dial Access Code
P
3. Receive confirmation tone, and restore the handset or press
.
To cancel Forward – All Call, Busy/No Answer, and Do Not
Disturb system-wide (Attendant Positions only):
T
1. Press .
2. Dial Access Code
T
3. Press .
P
.
D A
(default).
P
.
- OR -
P
.
D B
(default).
F H
(fixed Access Code).
Call Forward – Off-Premise
Electra Elite
T T
F I
.