NEC Electra Elite 48/192 Features And Specifications Manual page 298

Electra Elite
Features and Specifications Manual
When communication is stopped for about 30 seconds during
¥
handset conversation, the Handset Cordless terminal automatically
searches for a clear channel. An error tone rings the handset when it
is not on the Base unit.
¥ When reception
conversation, channels can be changed manually. Press the Ch key
to activate the 3-channel automatic scan (MCA).
change fails, an error tone is generated and the channel does not
change. While the channel is changing, the Talk/Batt.low LED
flashes (On 100 msec., Off 100 msec.).
¥ When a communication path is established between the Handset
Cordless terminal and the Base unit, the Talk/Batt.low LED is on and
dial tone is generated.
¥ When a communication path cannot be established in 5 sec., an error
tone is generated and the Handset returns to standby.
¥ A pencil eraser or contact cleaner should be used monthly to clean
the battery contacts on the Handset and Base unit to maintain stable
charge.
When the battery is low during standby, the Talk/Batt.low LED blinks
¥
(On 50 msec., Off 50 msec.).
¥ When the battery is low during a call, an alarm tone is generated, and
the Talk/Batt.low LED blinks (On 50 msec., Off 50 msec.).
Handset must be returned to the Base unit.
¥ The battery is charged by the line voltage.
becomes garbled
Issue 6
or static occurs during
When channel
D - 89
The