NEC Electra Elite 48/192 Features And Specifications Manual page 149

Issue 6
C - 30
3. Dial the station number or hunt group master number where
incoming calls are to be forwarded.
P
4. Wait for the confirmation tone, and restore handset or
press .
To verify (Multiline Terminals only):
T
A winking LED indicates the station is in Call Forward - All Call
mode.
The Feature Access or single On/Off key LED (when equipped)
remains on while this setting is assigned on the key.
To cancel (Multiline Terminal only):
1. Press Call Forward - All Call On/Off key.
P
2. Press .
To cancel (Single Line Telephone or Multiline Terminal):
1. Lift the handset or press
2. Dial Access Code
P
3. Wait for confirmation tone, and restore the handset or press
.
To set at a destination station (Attendant Positions only):
1. Lift the handset or press
2. Dial Access Code
3. Dial the station number to be forwarded and then the destination
number.
P
4. Wait for confirmation tone, and restore the handset or press
.
- OR -
P
.
D B
(set as default).
P
.
D G
(set as default).
Electra Elite
Call Forward - All Call