Table of Contents
Advertisement
Issue 6
D - 32
To place an internal call using DISA:
1.
Dial the desired number to connect the system.
2.
Dial the station number.
To change a DISA password:
1.
Go off-hook.
2.
Dial the DISA password set Access Code XX (default not
assigned, System Programmable).
3.
Enter the ID code (station number is default).
4.
Enter the DISA password
K K K K K K K K K K
(default:
5.
Enter the new DISA password (maximum: 10 digits).
6.
Go on-hook.
To reset the DISA password at the Attendant Position:
1.
Go off-hook.
2.
Dial the DISA password reset Access Code XX (default not
assigned, System Programmable).
3.
Enter the ID code (station number is default). Password is reset.
4.
Go on-hook.
To confirm a DISA password at the Attendant Position:
1.
Go off-hook.
2.
Dial the DISA password confirmation Access Code XX (default
not assigned, System Programmable).
3.
Enter the ID code. Current password is displayed.
4.
Go on-hook.
Direct Inward System Access (DISA)
Electra Elite
) .
- Quick Links:
- Section 1 General Information
Hide quick links:
Advertisement
Table of Contents
