NEC Electra Elite 48/192 Features And Specifications Manual page 159

Issue 6
C - 40
Setting, canceling or Call Forwarding is allowed only when logged
¥
out of ACD.
General:
Even when a user is logged on as an ACD agent, an individual call
¥
that does not come through the Pilot Number is forwarded.
Call Forward - Centrex supports the following:
¥
• Call Forward - All
• Call Forward - Busy
• Call Forward - No Answer
• Call Forward - Busy/No Answer
• Call Forward - All for CAR
• Call Forward - Busy/No Answer for CAR
Call Forward - Centrex calls transferred from another station are
¥
forwarded when the transferred Trunk is assigned as Centrex in
Memory Block 3-91 (Trunk Type Selection).
When a Centrex Trunk is DIT to a station with Call Forward - Centrex
¥
set with an incorrect registered number, the Centrex trunk recalls to
the same number until the caller hangs up.
The following incoming calls follow Call Forward - Centrex when the
¥
incoming trunk is a Centrex trunk:
• DIT/ANA
• Station Transfer
• Automated Attendant Transfer
• DISA Calls
When Call Forward - Centrex is set and all trunks are changed from
¥
PBX/CTX to CO, Call Forward is cleared from memory.
When a station is logged in an as ACD agent and Call Forward-Busy/
¥
No Answer is set, any non-ACD call transferred or ringing to that
station follows the Call Forward setting. System software S5000 or
higher is required.
Electra Elite
Call Forward - Centrex