NEC Electra Elite 48/192 Features And Specifications Manual page 330

Electra Elite
Features and Specifications Manual
When a station with Live Record or Live Monitoring activated is
¥
dropped for 911 - Cut Through, no indication is provided to the
station or CO line.
General
The station user can dial 9+911 or 911 to place a call to the
¥
Emergency services.
¥ Emergency 911 - Cut Through overrides the following features:
• Outgoing Restriction
• LCR
• ARS
• Forced Account Code Verified/Unverified
¥ Emergency 911 is displayed on the terminal at the originating station
of the 911 call.
¥ RELEASED FOR 911 is displayed on the display Multiline Terminal
at the station that was disconnected.
¥ DROPPED 911 is displayed on PS II terminals that are disconnected.
¥ When the line specified by Memory Block 3-69 is set for Trunk
Queuing, the system automatically disconnects the line and
originates 911.
¥ When the line specified by Memory Block 3-69 is held for the Call
Park feature, the system automatically disconnects the line and
originates 911.
¥ When a PBX/CTX access code was assigned using Memory Blocks
1-1-24 (PBX/CTS Access Code Assignment I) or 1-1-25 (PBX/CTS
Access Code Assignment II) and a 911 call is originated on a PBX/
CTX trunk, the system automatically inserts the PBX/CTX access
code.
¥ When the line is dropped by Emergency 911 - Cut Through, SMDR
prints the dropped call as a normal completed call.
When 911 is dialed, SMDR prints the call as a normal call with 911 in
¥
the digits dialed.
¥ When 911 is dialed, the Attendant Position (Port 1 or Port 2) displays
911 Call at XXXX (the station number used to dial 911) for 30
seconds.
Issue 6
E - 27