Attendant Station Outgoing Lockout - NEC Electra Elite 48/192 Features And Specifications Manual

Attendant Station Outgoing
Lockout
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Attendant Station Outgoing Lockout allows an Attendant Position with an
Attendant Add-On Console to set a predetermined Code Restriction Class
Assignment at any station assigned on the Attendant Add-On Console. This
allows an Attendant to set/reset a restriction to allow/deny an outgoing call.
Terminal Type:
Any Multiline Terminal programmed as an Attendant Position
Required Components:
DCU-60-1(BK)/(WH) Console or EDW-48-1/2(BK)/(SW) DSS/BLF
To set the Attendant Station Outgoing Lockout from the
Attendant Position using the Attendant Add-On Console:
1. Press programmed Lockout key on the Attendant Add-On Console.
2. Press the DSS key on the Attendant Add-On Console that is
associated with the station where Attendant Station Outgoing
Lockout is desired.
3. The green LED next to the DSS key lights to indicate lockout is set.
To cancel the Attendant Station Outgoing Lockout from the
Attendant Position using the Attendant Add-On Console:
1. Press the key programmed as Lockout key on the Attendant Add-On
Console.
2. Press the DSS key on the Attendant Add-On Console that is
associated with the station where Attendant Station Outgoing
Lockout is to be canceled.
3. The green LED next to the DSS key turns off to indicate the lockout is
canceled.
A-14
A - 41