NEC Electra Elite 48/192 Features And Specifications Manual page 268

Electra Elite
Features and Specifications Manual
To redial:
1. Pick up the handset, and press talk.
2. Listen for dial tone.
3. Press redial to dial the last number called.
To store a pulse-dialed number in memory:
1. Remove the handset from the Base, and press memory. The
talk/battery low LED flashes.
2. Enter the telephone number (up to 20 digits) to be stored.
3. Press memory, and enter the memory location (0~9) to be used
for storage.
4. Listen for a long beep, and the talk/battery low LED goes off to
indicate the number is stored.
Note:When any key other than 0~9 is selected, the handset beeps rapidly
to indicate that a number was not stored.
5. Log the number entered.
To enter a pause in memory dialing:
1. After entering the number to be stored in memory, press pause
to enter a pause in the number sequence.
Note:When pause is to be entered it counts as a digit, and the number can
have only 19 digits.
2. Complete steps 3~5 of the memory store procedure.
To store a tone-dialed number in memory:
1. Remove the handset from the Base, and press memory.
2. Press tone.
Note:When tone is pressed it counts as a digit, and the number can have
only 19 digits.
3. Enter telephone number (up to 19 digits) to be stored.
Issue 6
D - 59