Delayed Ringing - NEC Electra Elite 48/192 Features And Specifications Manual

Delayed Ringing

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Delayed Ringing allows programmed secondary answering positions to ring
on incoming calls after a programmed time. This feature applies to CO/PBX
lines, Secondary Incoming Extensions, and Call Arrival Keys.
Terminal Type:
All Multiline Terminals
Required Components:
None
To process an incoming call:
1. Receive delayed incoming ring.
2. Answer the call normally.
Data Assignment:
Use Memory Block 1-1-77 [Delayed Ringing Time Assignment (CO)] to
¥
set the time (default: 15 seconds) between the detection of an incoming
outside line call and the start of Delayed Ringing.
Use Memory Block 1-2-26 [Delayed Ringing Time Assignment (ICM)] to
¥
set the time (default: 10 seconds) between the detection of an incoming
internal call and the start of Delayed Ringing.
Use Memory Block 2-01 (Trunk to Tenant Assignment) to resolve Tenant
¥
Ringing conflicts by Trunk to Tenant Assignment. The lower number
assigned tenant is used as the ringing control.
Restrictions:
When a CO line is assigned DIT/ANA to a station that also has Delay
¥
Ringing assigned, the DIT/ANA does not occur until the Delay Ringing
time expires.
D-3
D - 7