NEC Electra Elite 48/192 Features And Specifications Manual page 294

Electra Elite
Features and Specifications Manual
With Auto Talk On:
1. When the Handset is on the Base unit, lift it.
2. The Talk/Batt.low LED flashes then lights continuously to indicate
established communication path between the Handset and the
Base station.
3. Talk to the caller. The Message waiting LED is Off.
4. When finished, press the Talk key or place Handset back in the
Base unit to disconnect the call.

In Auto Standby, the Talk key does not have to be pressed to
disconnect. Place the Handset in the Base unit to disconnect the
call.
5. After call is disconnected the Message Waiting LED becomes
active again when messages are waiting.
Setting handset ringer On/Off Volume in Standby Mode:
1. Press Vol key to adjust volume normal or high.
2. While Vol is pressed, the ringer starts to ring based on the
current setting.
Note:Ringer Volume can be adjusted with Ringer On/Off key in Off.
To Adjust Receiver Volume with a call in progress:
Press the Vol key repeatedly to adjust from Medium
Normal in this order.
Note: When call is disconnected, default volume returns to Normal.
To Mute Handset to disable the microphone:
1. Press Mute key.
2. The Talk/Batt.low Led Blinks 500 msec On, 500msec Off during
Mute.
3. Press Mute again to reactivate the microphone.
Note:Voice is not transmitted during Mute.
To make a call with Auto Talk Off:
Issue 6
High Low
© © ©
D - 85