NEC Electra Elite 48/192 Features And Specifications Manual page 203

Issue 6
SERVICE
CONDITIONS
C - 84
To transfer a call from a cordless Single Line Telephone to its
associated Multiline Terminal:
1. Multiline Terminal user goes off-hook.
2. Single Line Telephone user goes on-hook (at this time, the call is
automatically connected to the Multiline Terminal).
To transfer a call from a Multiline Terminal to its associated
cordless Single Line Telephone:
1. Single Line Telephone user goes off-hook (at this time, the call is
automatically connected to the Single Line Telephone).
2. Multiline Terminal user goes on-hook.
To use APR/APA Hookflash:
Refer to operation for Single Line Telephone Access.
Data Assignment:
Use Memory Block 4-39 (APR Ring Mode Assignment) to specify
¥
NON (no Ring), STA (ring Station Number only, default), or ALL (ring
all stations) for SLTs connected to the APR/APA-U Unit for the
cordless telephone.
Use Memory Block 4-59 (APR/APA Hookflash Selection) to allow or
¥
deny Hookflash on an APR/APA-U Unit. System Software S5500
or higher is required.
Restrictions:
A voice announced internal call to the Multiline Terminal does not
¥
ring the cordless telephone.
The ADA(2)-W(BK)/(SW) Unit cannot be used in conjunction with an
¥
ADA(1)-W(BK)/(SW) Unit.
Only one cordless Single Line Telephone can be connected to an
¥
ADA(2)-W(BK)/(SW) Unit or APR/APA-U Unit.
When CO Prime Line is assigned to the associated Multiline
¥
Terminal, internal dial tone cannot be transferred to the cordless
telephone.
Electra Elite
Cordless Telephone Connection