NEC Electra Elite 48/192 Features And Specifications Manual page 334

Electra Elite
Features and Specifications Manual
A system that provides service to a different address using OPX
¥
circuits must provide a specific CESID for that station. The CESID is
provided by the TELCO when the OPX circuit is provided. The KTS
administrator must file a callback number along with this CESID to
the E911 system that then places this information in the E911 system
database.
¥ When the E911 trunk is busy, the system allows the call to be routed
over another trunk. This is software selectable. No Alternate Routing
is the default (with a warning not to change it to Allow) because of the
concern that under catastrophic conditions a single location could
overload the emergency system with multiple 911 calls.
¥ When a call is originated using Enhanced 911, the CAMA or ISDN
PRI trunk is seized even when a CESID code is not registered.
¥ The E911 trunk should not be assigned to a line key, trunk group,
route advance block, Specified Tenant on CO/PBX/Centrex Line
Seizure (1- or 2-digit), or Outgoing (CO only) Access in Same
Tenant.
¥ Enhanced 911 is available only when a CAMA or ISDN PRI trunk is
connected and assigned to the system.
¥ The Facility Interface Code (FIC) for a dedicated CAMA or ISDN PRI
trunk is 02RV-O. This code is provided when service is ordered to
indicate the trunk type.
¥ The following features cannot restrict the station ability to dial 911:
• Account Code - Forced/Verified/Unverified
• Station Outgoing Lockout
• LCR
• Caller ID Blocking
Issue 6
E - 31