NEC Electra Elite 48/192 Features And Specifications Manual page 67

Issue 6
A - 46
6. Enter Mode:
A
Day Mode
B
Night Mode
C
Weekend Mode
7. Record Message.
8. Go on-hook.
To set the Automated Attendant Mode from the Attendant
Position:
T
1. Press .
H A
2. Press
3. Dial the incoming trunk number (
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle.
Note: A trunk that is busy when 00 is dialed is not set. To set the Automated
T
Attendant to a busy trunk, dial the individual trunk number.
4. Press
To cancel the Automated Attendant Mode from the Attendant
Position:
T
1. Press .
H B
2. Dial
3. Dial the incoming trunk number (
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle. A trunk that is busy when 00 is dialed is not set. To set the
T
Automated Attendant to a busy trunk, dial the individual trunk number.
4. Press .
.
K K
.
.
K K
Electra Elite
F D K K
~ ) .
F D K K
~ ) .
Automated Attendant