NEC Electra Elite 48/192 Features And Specifications Manual page 510

Electra Elite
Features and Specifications Manual
General:
System Software S5500 or Higher allows Account Code -
¥
Forced/Verified/Unverified to be used with this feature.
Names/numbers can be found in the directory in two ways:
¥
• Scroll the list using the
• Search by entering a letter or digit using the dial pad keys.
Both the name and number can be stored in the directory. When
¥
both are stored, only the name is shown in the LCD.
The third line of the LCD displays the Softkey designations:
¥
• SYSSystem Speed Dial Numbers.
• STA
• UP
• DOWNMoves down to display additional System or Station
When the Feature key or digit key is not pressed within 10 seconds,
¥
scrolling is canceled.
When scrolling, the system uses the following criteria to display the
¥
information in the order listed below:
• Spaces (between alphabetical characters)
• Alphabetical Characters
• Digits
• Special Characters
When more than one entry has the same name, the Speed Dial
¥
buffer with the lowest number is displayed first (i.e., buffer 04 is
displayed before buffer 08).
Users can scroll Speed Dial buffers that are included in their Tenant
¥
Group only.
The spaces programmed in the beginning of a name are ignored
¥
during scrolling for sorting (i.e., ^^^Jean is regarded as Jean).
The speed dial buffers can be manually searched by scrolling
¥
through the Speed Dial Directory or the search can be narrowed
down to the first letter of the name or first digit of the phone number.
For the first letter of the name, the user can use the dial pad key with
that letter on it. For example to search for NEC, the user dials 66
(i.e., 6 has three letters, M, N and O). Dial 66 to reach names starting
with alphabet N and press
V
( UP or DOWN) Softkey.
Station Speed Dial Numbers.
Moves up to display additional System or Station
Speed Dial numbers.
Speed Dial numbers.
to be used as an Enter key.
D
Issue 6
D
S - 5