NEC Electra Elite 48/192 Features And Specifications Manual page 602

Electra Elite
SERVICE
CONDITIONS
Features and Specifications Manual
Logon/Logoff
This feature allows an Agent to log on/off the system. Operating statistics
are collected for the Agents until they log off. This feature is activated by
the Logon/Logoff key that is programmed on a Feature Access or
One-Touch key at the Agent position.
Non-UCD Call
This feature allows Agents or Supervisors to receive calls directly from
stations or Attendants and dial trunks (e.g., Tie line, DID, DIT).
Answer/Release - Headset
This feature allows an Agent using a headset to answer or release a UCD
call. This feature uses the Headset On/Off key that is assigned on a line
key in System Programming.
Control of Night Mode
This feature allows the Supervisor to activate Night Mode. This feature can
be activated and deactivated by the Night Transfer key that is programmed
on a Feature Access or One-Touch key on the Supervisor terminal.
Monitoring (Barge-In)
This feature allows the Supervisor to select an Agent position to monitor
calls connected to that position. This feature is activated by key operation
on the Supervisor terminal.
Data Assignment:
Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-digit)
¥
Assignment] Function number 030~032 to assign Access Codes for
DND Set (default: 40), Call Forward All Call/DND cancel (default: 42)
and Log ON/OFF (Default not assigned).
Use Memory Block 1-1-76 (Barge-In Alert Tone Assignment) to
¥
specify whether (default: YS) or not Barge-In Alert Tone is allowed
for a monitor feature.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 1 LK4 to enable (LED On) or disable (Default LED
Off) Barge-In Originate on a CO/PBX Line (Calling Party).
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 1 LK5 to enable (default LED On) or disable (LED
Off) Barge-In Receive (Called Party).
Issue 6
U - 3