NEC Electra Elite 48/192 Features And Specifications Manual page 525

Issue 6
SERVICE
CONDITIONS
S - 20
To cancel Timed Alarm using Attendant position:
T
1. Press
E H
2. Dial
T
3. Press
To set Timed Alarm for a Single Line Telephone using a Multiline
Terminal (Attendant Position only):
1. Lift the handset or press
2. Dial the Timed Alarm set/cancel to Single Line Telephone Access
Code X (not assigned at default).
3. Dial the Single Line Telephone station number.
4. Enter time to set the alarm (24-hour format in 5-minute
increments).
5. Restore the handset.
To cancel Timed Alarm for a Single Line Telephone using a
Multiline Terminal (Attendant Position only):
1. Lift the handset or press
2. Dial the Timed Alarm set/cancel to Single Line Telephone Access
Code X (not assigned at default).
3. Dial the Single Line Telephone station number.
I I
4. Dial time as
5. Restore the handset.
Data Assignment:
Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
¥
Assignment] Function Number 044 to set the Access Code for SLT
Timed Alarm.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 2 LK1 to allow (default: LED On) or deny (LED Off)
Timed Alarm Set/Reset for SLT for each Class of Service.
.
.
.
P
, and wait for internal dial tone.
P
, and wait for internal dial tone.
I I
.
:
Electra Elite
SLT Timed Alarm