NEC Electra Elite 48/192 Features And Specifications Manual page 563

Issue 6
SERVICE CONDITIONS
S - 58
Data Assignment:
Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
¥
Assignment] Function Number 148 to assign an Access Code for
Station Relocation.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 3 LK 1 to Allow (default: LED On) or Deny (LED
Off) any Attendant to set the Terminal Exchange Mode.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 5 LK 3 to Allow (default: LED On) or Deny (LED
Off) any user to set Station Relocation.
Restrictions:
This feature cannot be used with the following combinations:
¥
Electra Professional ............................Single Line Telephone
Electra Professional ............................Single Line Telephone Adapter
Electra Elite.........................................Single Line Telephone
Electra Elite.........................................Single Line Telephone Adapter
Single Line Telephone.........................Single Line Telephone Adapter
An error tone is received and ERROR is displayed in the LCD under
¥
the following conditions:
• A station number that causes a prohibited combination is
entered.
• A station number that does not exist is entered.
• The station number of the terminal being used to perform
Station Relocation is entered.
• A Pilot Number or CAR number is entered.
• The wrong password is entered.
• A station number of the terminal to be exchanged is entered
and that station is not idle.
• Station Relocation Mode is not set.
This feature cannot be used to relocate DSS Consoles because
¥
consoles are not assigned station numbers.
Relocation is performed for a station that has an associated DSS
Console, the station is relocated but not the DSS Console.
Electra Elite
When Station
Station Relocation