Electra Elite
Features and Specifications Manual
3.
Press the MUTE key to enter the selected function and advance
to the next function key.
4.
Repeat steps 2~3 to program function keys F2~F4.
5.
After programming function key F4, press the MUTE key to enter
the LCD mode.
6.
Press the R/VOL key to set LCD Mode 1 or 2. (LCD mode
1= Electra Professional Terminal, LCD Mode 2 = D
Terminal.)
7.
Press the MUTE key to enter Off-Hook Ring mode.
8.
Press the R/VOLkey to select Off-Hook Ring ON or OFF.
9.
Press the TALK key to exit.
Function keys F1 ~ F4 can be programmed as Line Keys 1~16,
Redial (LNR/SPD), Answer (ANS), Feature (FNC), or Recall.
When assigned, these keys operate the same as on an NEC
Multiline Terminal.
When initially installed, function keys F1~F4 default to Line Keys
1~4 respectively and Off-Hook Ringing defaults to ON.
term
The D
Cordless and D
the dedicated function relay; however, the meaning is the same.
term
D
Cordless
TALK
CNF
TRF
MUTE
HOLD
R/VOL
term
Cordless Lite nomenclature differ slightly on
term
D
Issue 6
term
Series E
Cordless Lite
talk
conf
transfer
mute
hold
vol
D - 65