Issue 6
U - 16
•
COIB(4)-U10 ETU (4 port COI or COID mode Interface)
•
COID(8)-U10 ETU (8 port Caller ID CO/PBX Line Interface)
•
DID(4)-U10 ETU (4 port Direct Inward Dialing Interface)
•
DPH4-U10 ETU (Doorphone Interface for 4 Doorphones)
•
DTI-U10/20 ETU (T1/FT1 Trunk Interface)
•
ECR-U10 ETU (External Control Relays for General Purpose
Paging, External Tone Ringer, and Night Chime. Two RCA
jacks for Input/Output Paging and Output Ring Tone).
•
ESI(8)-U10 ETU (8 port Electronic Station Interface)
•
IPT(4)/(8)-U10 ETU (4 or 8 port Voice over Internet Protocol)
•
MIFA-U10 ETU (UCD or ACD Processor).
supported by Electra Elite 48.
•
MIFM-U10 ETU (SMDR, PC Programming, LCR, and Caller ID
processor)
•
OPX(2)-U10 ETU (2 port Off-Premise Extension Interface)
•
PBR( )-U10 ETU (4 circuits of Push Button Receiver)
•
PRT(1)-U10/20 ETU (ISDN-Primary Rate)
•
SLI(4)/(8)-U10 ETU (4 or 8 port Single Line Interface)
•
TLI(2)-U10 ETU (2 port Tie Line Interface)
•
VDH2(8)-U10 ETU (8-port ESI with LAN Hub Integration.
Stations are 10BaseT and hub interconnection is 10BaseT or
10Base2)
•
VMS(2)/(4)/(8)-U10 ETU (2, 4, or 8 port Voice Mail System)
•
VRS(4)-U10 ETU (4 port Voice Recording Services Interface)
Any interface circuit board occupies eight ports regardless of the
¥
number of circuits contained on the board.
Refer to the Electra Elite 48 General Description Manual or the
¥
Electra Elite 192 General Description Manual for more information.
The MIFM-U10 ETU has an optional built-in modem that works only
¥
when the MIFM-U10 ETU is installed in slot S1 or S2 in the B64-U10
KSU or slot S2 in the B48-U10 KSU.
Electra Elite
ACD is not
Universal Slots