NEC Electra Elite 48/192 Features And Specifications Manual page 89

Issue 6
SERVICE
CONDITIONS
A - 68
To return a call to the number displayed on the LCD:
Go off-hook. The system automatically accesses an outside line and
dials the ID number displayed on the LCD.
Data Assignment:
Use Memory Block 1-11-07 (DTI Trunk Type Assignment) to make
¥
Trunk assignment to ANI.
Use Memory Block 1-11-08 (Digits Delete for T1 ANI Assignment) to
¥
delete the information digits of the ANI information.
When a system speed dial buffer is assigned number and name, the
¥
name can be displayed when the ANI number information matches a
speed dial number. Memory Block 3-53 (Caller Name Indication
Selection) must be assigned to TRK for the name to be displayed.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
¥
Selection 2] Page 4 LK3 to ensure ANI is allowed (LED On). Default
is LED Off.
When CAR keys are assigned on the Multiline Terminal and a DIT/
¥
ANA or VRS/Automated Attendant transferred call is received at the
CAR, the following assignments are required:
• Use Memory Block 4-41 (SIE/CAR Ringing Line Preference
Selection) to allow (default: LED On) or Deny (LED Off) Ringing
Line preference (go off-hook or press speaker key) on all
telephones assigned to a CAR key on the Multiline Terminal.
• Use Memory Block 3-44 (Caller ID Display Assignment for CO/
PBX Line). to assign one Multiline Terminal per CO/PBX line to
display Caller ID indication for incoming CAR calls.
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify
¥
the MIFM-U10 ETU and DTI-U10/20 ETU.
Restrictions:
SIE incoming calls do not support ANI Indication even when the
¥
Multiline Terminal is ringing.
Name is not supported on ANI trunks.
¥
T1-ANI trunks can be used for incoming calls only using System
¥
Software S3000.
T1-ANI trunks can be used for outgoing calls using System
¥
Software S4500 or higher.
Automatic Number Indication (ANI) on T1
Electra Elite