Call Forward - Display - NEC Electra Elite 48/192 Features And Specifications Manual

Call Forward - Display

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
When a call is forwarded from one Multiline Terminal to another, the
forwarding indication and forward station number are shown on the Multiline
Terminal display.
System Software S2000 or higher is required.
Terminal Type:
All Display Multiline Terminals
Required Components:
Multiline Terminals with display. Refer to Call Forward - All Call and Call
Forward - Busy/No answer features.
None
General:
DIT, ANA, DID, Tie, Automated Attendant transfer, and SCD calls can
¥
support Call Forward - Display.
This feature only supports forwarded calls to a primary station number.
¥
When the destination is a CAR key, the forwarding display information is
not shown.
Internal calls do not show forwarding display.
¥
C-10
C - 41