NEC Electra Elite 48/192 Features And Specifications Manual page 361

Issue 6
SERVICE
CONDITIONS
F - 18
3. Talk with the party when the call is answered.
1. Press the
programmed for Speed Dial.
2. Talk with the party when the call is answered.
Answering:
1. Press the line key receiving an incoming call or press
2. Talk with the calling party.
Assignment:
Use Memory Block 4-29 (HFU Selection) to set YS (enable) or NO
(disable) for the HFU-U Unit per station. Default is NO.
General:
¥ One Override can be received during handsfree conversation.
¥ The microphone must be ON to answer calls handsfree.
¥ A Flexible Line key can be assigned as a MIC ON/OFF key, or a One-
Touch key can be programmed as a Microphone Control key.
¥ While engaged on an outside line conversation using built-in
Handsfree Operation,
(half-duplex) if both parties speak simultaneously.
¥ During a conversation, the MIC ON/OFF key can be used to mute the
microphone.
Monitoring volume can be adjusted using the volume control on the
¥
Multiline Terminal.
¥ When a Multiline Terminal user lifts the handset, monitoring is
automatically released, and the Speaker LED goes off.
¥ The built-in Speakerphone is a half-duplex speaker phone. Noisy or
poor acoustical environments have a large impact on the speaker
phone switching from transmit to receive calls and vice versa.
- OR -
desired Feature Access
the conversation
Electra Elite
or One-Touch key
O
.
may be interrupted
Full Handsfree Operation