NEC Electra Elite 48/192 Features And Specifications Manual page 285

Issue 6
OPERATING
PROCEDURES
D - 76
term
To program the D
1. Press and hold down
flashes red.
2. Press R/VOL repeatedly to scroll through the line key (LK) and
feature options for function key F1.
3. Press MUTE to select the displayed line key or feature.
4. When a Line Key is assigned, press MUTE once to enter the Off-
Hook Ringing ON or OFF Mode. Press R/VOL to toggle between
/TALK for ON or /NO TALK for OFF.
5. Press MUTE to advance to the next function key (F2 ~ F4).
6. After programming F4, press MUTE to advance to Global Off-
Hook Ringing Assignment.
7. Press R/VOL to turn Global Off-Hook Ringing ON/OFF (LCD
indicates ON or OFF).
8. Press TALK to exit.
 Function keys F1 ~ F4 can be programmed as Line Keys 1~16,
Redial (LNR/SPD), Answer (ANS), Feature (FNC), or Recall.
When assigned, these keys operate the same as on an NEC
Multiline Terminal.

When initially installed, function keys F1~F4 default to Line Keys
1~4 respectively and Off-Hook Ringing defaults to ON.

Global Off-Hook Ringing must be ON (default) for any Function
key to work with Off-Hook Ringing.
To place an internal call:
1. Press TALK. ¥
2. Dial Station Number.
Press (F1~F4) programmed for Direct Station Selection (DSS).
3. Announce call after tone burst or wait for call to be answered.
Cordless II:
and #, then press TALK. The F1 LED
,
icon is displayed.
- OR -
Electra Elite
term
D ® Cordless II Terminal