Incoming Call Identification - NEC Electra Elite 48/192 Features And Specifications Manual

Incoming Call Identification

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Incoming Call Identification (provided for Internal Ring Transfer, Call Forward,
and CO Transfer Ring) displays caller name or station number on Multiline
Terminals with an LCD. Internal calls are identified by caller name and station
number. .A ringing Tie line/DID call generates a display on the LCD of the line
number. When Caller ID is provided, the CO incoming caller directory number
or name is displayed.
System Software S4000 or higher allows both name and number to be
displayed by Caller ID.
Terminal Type:
All Multiline Terminals with LCD
Required Components:
None
For an incoming internal call:
1. The ICM LED flashes.
2. The caller station number and name (when assigned) are displayed
on the LCD.
Data Assignment:
Use Memory Block 3-00 (Trunk Name/Number Assignment) to specify
¥
the Name or Number for accommodated CO/PBX lines for display when
the line is seized or during an incoming call.
Use Memory Block 4-18 (Station Name Assignment) to assign Names to
¥
telephone stations.
I-3
I - 5